Chemical Engineering Teaching Laboratories (ENCARB 223, 225, and 244)

Currently the Department of Chemical Engineering holds it teaching laboratories in ENCARB 223,225,and 244. Chemical Engineering Laboratory I (CHEG 3101) covers Fluid Mechanics, Unit Operations, and Heat Transfer; Chemical Engineering Laboratory II  (CHEG 4101) covers Separations, Fluid Mechanics and Unit Operations; and Chemical Engineering Laboratory III (CHEG 4104) covers Reaction Engineering and Process Controls.

During official laboratory teaching hours,  only students and faculty of the course who have taken the safety training may enter the laboratory. Appropriate PPE gear (safety goggles/glasses, laboratory coats (if needed), closed toed shoes, long pants) must be worn at all times. All safety rules must be followed.

Those who need to access the teaching laboratories outside designated laboratory teaching hours must obtain permission and access from the appropriate laboratory technician. Rules regarding PPE gear and safety must be followed.

Students/faculty must be trained to use the appropriate equipment before usage. Before leaving, all reagents/equipment must be placed in its proper place and the technician must be notified to secure the room.

Contact CHEG Technician: Sachie Etherington (p) 936-261-9412 (e) smetherington@pvamu.edu

Room 225 Contains:

Armfield F1-15: Bernoulli’s Theorem Demonstration with Hydraulic Bench
Edibon QRFT: Tubular Flow Reactor
Edibon PBCC: Computer Controlled Centrifugal Pump Bench
Edibon AFT-B: Fluid Friction in Pipes with Hydraulic Bench
TQ H83: Two Stage Centrifugal Pump Set
TQ TD360C/D: Shell and Tube Heat Exchanger/Jacketed Vessel with Coil and Stirrer
TQ TD360: Heat Exchanger Module
North Slope Chiller
Armfield CEP-MKII: Continuous Stirred Tank Reactors in Series

Room 244 Contains:

Pasco teaching equipment
Stratasys F120
FlashForge
MakerBot

Room 223 Contains:

Abbe Refractomer
Armfield UOP3CC: Distillation Column
B/R Distillation Column
DAC World Wide Process- Control Training System
Edibon CAGC: Computer Controlled Gas Absorption Column
Edibon CEAC: Computer Controlled Controller Tuning Unit
Edibon FME34: Fluid Statics and Manometry
Edibon UDCC: Computer Controlled Distillation Unit

Mailing Address:
Department of Chemical Engineering
P.O. Box 519, MS 2505
Prairie View, TX 77446

By Phone or Email:
Email: chlove@pvamu.edu
Telephone: 936-261-9400
Fax: 936-261-9419

Physical Address:
Campus Map (Building 36)
Department of Chemical Engineering
C.L. Wilson, Room 200
550 Anne Preston Street
Prairie View, TX 77446